Zero-Leakage, Two-Way Transfer Valves with 3-Port and 6-Port Advanced Designs
The dual circuit, three-way and six-way transfer valves are designed for assembly between filters, strainers, and heat exchangers to guarantee continuous service and positive shutoff. The operation of our zero-leakage transfer valve is much simpler than other valves; there is no risk of seating and unseating, nor are there any locking pins to lift.
The internal arrangement is free of all springs, levers, and pins that often break loose and cause severe damage to the costly equipment it was meant to protect. Handing is simple—after equalizing the pressure, rotate the handle to transfer the fluid from one vessel to the other. Available in 1-1/2, 2, 3, and 4-inch sizes, these valves feature an exclusive internal quad-ring design that eliminates side-to-side leakage even at pressures tested up to 1,000 PSI. Valves are designed and recommended for operating pressures no higher than 665 PSI. A steel body and iron rotor are standard, and stainless steel rotors or all-stainless-steel fabrication is available.