Spinner II Oil Cleaning Centrifuges

The Spinner II centrifuge is a highly efficient bypass filtration device. It diverts a small sidestream of oil for processing and returns clean oil to the crankcase.

All centrifuge models have the same basic method of operation. This demonstration shows a Model 200HD centrifuge, which has a reusable rotor. A 500 Series centrifuge operates by the same principle, but has a sealed, single-use, disposable rotor.

Powered only by engine oil pressure (pump-assisted models are available if needed), the centrifuge rotates at speeds in excess of 6,000 rpm, generating a force more than 2,000 times greater than gravity. This force slings contaminants smaller than one micron out of your oil and packs them into a dense cake on the wall of the centrifuge bowl.

1. Dirty oil flows through hollow spindle into rotating bowl under normal oil pump pressure.

2. As oil passes through the rotating bowl, centrifugal force separates oil and solid contaminants.

3. Contaminants are deposited as a solid cake on the surface the bowl.

4. Clean oil exits through opposing, twin nozzles that power the centrifuge in excess of 6,000 rpm.

5. Clean oil returns to the sump/reservoir from the level control base.

Mining

Boost productivity while protecting mobile and fixed plant machinery.

Oil and Gas

More uptime for gensets, pressure pumping equipment and more.

General Industrial

From marine applications to construction, get protection and savings.

Fabrication and Metalworking

Reduce operating costs, extend tool life and increase productivity.

Trucking

Extend drain intervals and better protect engines.

Transit

Trusted by virtually every North American fleet, we help your vehicles go further.

CP™ Systems

Spinner CP™ systems are pump-assisted centrifuge packages that provide both online and offline fluid cleaning for a wide range of industrial machinery. Spinner CP™ systems offer solutions for non-pressurized equipment and systems and are custom-engineered to meet specific requirements.

Packages typically include a single Spinner II centrifuge, but may incorporate multiple centrifuges operating in parallel for high-volume applications. A Model 3600 centrifuge processes up to 960 gallons per hour (360 lpm). Spinner CP™ systems with multiple centrifuges are capable of virtually unlimited oil-cleaning capacities.

CP™ Systems

This provides a centrifuge-screen combo, which integrates a full-flow wire cloth cleanable screen with a Spinner II oil-cleaning centrifuge to completely eliminate disposable filters.

The CS cleanable screen processes the full flow of oil through its stainless steel wire cloth mesh. Meanwhile, a portion of the oil also passes through the Spinner II centrifuge to remove both large particles and fine contaminants down to less than one micron.

Spinner II CS Advantages